Geek Vape B100 Boost PRO 2 Pod Kit Review
The Geekvape B100 (Aegis Boost Pro 2) is a 100W pod mod kit for one 18650 battery, with a 4.5ml pod that takes Geekvape P coils for direct-to-lung (DTL) vaping. See more from Geekvape or compare other pod kits.
B100 Highlights
Up to 100W on One 18650
The Geekvape B100 runs on one flat-top 18650 battery, sold separately, and goes from 5W to 100W on Geekvape’s AS Chip 3.0.
IP68 Rated
Geekvape rates the B100 IP68, so it’s built to keep out water and dust.
A-Lock
An A-Lock switch stops accidental button presses.
4.5ml Pod on P Coils
The pod has top airflow, which Geekvape designed to stop leaks. A P0.15Ω XM coil comes installed, rated 70W to 85W, and a P0.4Ω coil rated 50W to 60W is in the box.
B100 Specs
Mod
- Power: 5W to 100W
- Chipset: AS Chip 3.0
- Display: 0.96″ curved screen
- Locks: A-Lock switch
Battery and Charging
- Batteries: one flat-top 18650, not included
- Charging: USB-C
Protection
- Water and dust: IP68
Pod
- Pod: B100 pod
- Capacity: 4.5ml
- Airflow: top airflow
- Coils: Geekvape P series
Size and Weight
- Size: 121.21 × 43.73 × 31.65mm
P Coils and Wattage
The B100 pod takes Geekvape P coils, and Geekvape rates them all for DTL.
| P coil | Geekvape rating |
|---|---|
| P0.15Ω XM coil | DTL, 70–85W |
| P0.2Ω coil | DTL, 60–70W |
| P0.4Ω coil | DTL, 50–60W |
The P0.15Ω XM coil comes installed and a P0.4Ω coil is in the box. We carry Geekvape P coils in packs of 5, and B100 pods in packs of 2. Our coil compatibility guide shows which coils fit each Geekvape tank and kit.
Batteries
Use a high-drain 18650 with flat ends, so the battery door can close. Pick one from a known brand, don’t charge batteries overnight, and carry spares in a case. The FDA has more battery safety tips.
How to Set Up the B100
- Add a battery: open the battery door and put in a charged flat-top 18650.
- Fill and prime: fill the pod and let the coil soak for a few minutes before your first puff.
- Set the power: start at 70W for the installed P0.15Ω XM coil, or 50W for the P0.4Ω coil, and work up.
- Lock it: switch on the A-Lock before the B100 goes in a pocket or bag.
Who the B100 Is For
The Geekvape B100 suits DTL vapers who want a tough pod mod with up to 100W from one battery. It isn’t made for mouth-to-lung (MTL) vaping. For a pod kit on B coils, see the Aegis Hero 5. For two batteries and up to 200W, see the Aegis Legend 5.
Good to know: the battery isn’t included, and the B100 takes P coils, not B coils, despite its name.
What’s in the B100 Box
- B100 mod (battery not included)
- B100 pod, 4.5ml
- P0.15Ω XM coil (installed)
- P0.4Ω coil
- USB-C cable
- Coil tool








