MI-POD PRO + Kit Review
The MI-POD PRO + Kit is a small, draw-activated pod kit with a built-in 950mAh battery and USB-C charging. Two 2ml Mi-Pod PRO pods come in the box, each with a 0.9Ω mesh coil, and you fill them from the side. See more from Mi-Pod or compare other pod systems.
Mi-Pod PRO + Highlights
Draw-Activated
The device fires when you inhale. Its button only turns it on and off, with five quick presses.
950mAh Battery
The built-in battery charges over USB-C. Reviewers found a full charge takes about an hour.
0.9Ω Mesh Pods
Each 2ml pod has a built-in 0.9Ω mesh coil and fills through a tab on its side.
Stealth Mode
Hold the button for 5 seconds and the light stays off while you vape.
Mi-Pod PRO + Specs
Device
- Battery: 950mAh, built in
- Output: 3.0–4.2V
- Firing: draw-activated; the button turns it on and off
- Charging: USB-C
- Airflow: fixed
- Protection: 10-second cutoff, short circuit, low voltage, low resistance and overheating
Pods
- Pod: PRO pod, 2ml, side fill
- Coil: 0.9Ω mesh, built into the pod
- In the box: 2 pods
- Draw: loose MTL, by reviewers
Mi-Pod Kit Colors
- Options: Black Raw, Blue Pebbles, Blue Voyage, Brown Raw, Carbon Fiber, Fuchsia Hue, Midnight Hue, Pearl Dragon, Pink Voyage, Purple Pebbles, Red Raw, Royal Hue, Sea Dragon, Silver Voyage, Slate Hue, Vino Hue, Yellow Jacket
Battery Light Colors
The light shows the battery level while you vape:
| Light | Battery |
|---|---|
| Blue | full |
| Purple | in between |
| Red | low |
It flashes red 5 times when you turn it on. Ten red flashes mean low voltage or the 10-second cutoff; four mean a short circuit, low resistance or overheating.
How to Set Up the Mi-Pod PRO +
- Charge it: take the pod out and plug in the USB-C cable from the box.
- Fill a pod: lift the silicone tab on the side, fill the chamber without getting e-liquid in the center airflow tube, and don’t overfill.
- Let it soak: close the tab and wait 5 minutes so the cotton can soak.
- Insert the pod: line up the gold pins with the contacts inside the device.
- Turn it on: press the button 5 times quickly. The light flashes red 5 times when it’s ready.
- Vape: inhale to fire.
Who the Mi-Pod PRO + Is For
It suits vapers who want a small, draw-activated pod kit with a loose MTL draw and no power settings to change.
Good to know: Reviewers note that the battery light only shows while you vape or charge, and that the pod takes a firm pull to remove.
What’s in the Box
- Mi-Pod PRO + device
- 2 PRO pods, 0.9Ω mesh
- 2 lanyard connectors
- USB-C cable
- User manual



