Geekvape Digi Max Pod System Review
The Geekvape Digi Max is an 80W pod kit with a built-in 3000mAh battery, a 1.47″ touch screen and 5ml pods. It takes J pods, with the coil built in, or JR pods with J coils. See more from Geekvape or compare other pod kits.
Digi Max Highlights
Built-In 3000mAh Battery
There’s no battery to buy. It charges over USB-C at 5V/2A, and Geekvape says it passes 50% in 20 minutes.
Up to 80W, Four Modes
Swipe between Smart, Boost, Eco and Custom. Geekvape says Boost reaches 80W with the 0.2Ω J pod.
1.47″ Touch Screen
Swipe the touch screen to change modes. It also has an RGB light strip with light effects you can adjust.
Zinc Alloy, Textured Grip
The body is zinc alloy with an in-mold label (IML) film and a textured surface for grip.
Digi Max Specs
Mod
- Power: up to 80W
- Modes: Smart, Boost, Eco and Custom
- Display: 1.47″ touch screen
- Firing: draw or button
- Locks: A-Lock
- Lights: RGB light strip
- Body: zinc alloy, IML film
Battery and Charging
- Batteries: built-in 3000mAh
- Charging: USB-C, 5V/2A
Pod
- Pods: J pods or JR pods
- Capacity: 5ml
- Airflow: top airflow, adjustable
- Resistance: 0.2Ω to 1.2Ω
Size and Weight
- Size: 112.16mm tall, 34.18mm wide
J Pods, J Coils and Wattage
The Digi Max takes Geekvape J pods from 0.2Ω to 1.2Ω, and JR pods with J coils. The ratings are Geekvape’s.
| Pod or coil | Geekvape rating |
|---|---|
| J pod, 0.2Ω | DTL, 50–60W |
| J pod, 0.3Ω, dual coil | RDL, 30–40W |
| J pod or J coil, 0.4Ω | RDL, 23–28W |
| J pod or J coil, 0.6Ω | RDL, 16–21W |
| J pod or J coil, 0.8Ω | MTL & RTL, 12–17W |
| J pod or J coil, 1.2Ω | MTL, 8–12W |
A 0.4Ω J pod comes installed and a 0.6Ω J pod is in the box. We carry J pods, JR pods and J coils. Our coil compatibility guide shows which coils fit each Geekvape tank and kit.
How to Set Up the Digi Max
- Charge it: plug the Digi Max into a USB-C charger.
- Fill and prime: fill the J pod and let the coil soak for a few minutes before your first puff.
- Pick a mode: swipe the screen to choose Smart, Boost, Eco or Custom.
- Set the airflow: adjust the top airflow, then draw or press the button to vape. Slide the A-Lock before it goes in a pocket.
Who the Digi Max Is For
The Geekvape Digi Max suits vapers who want lots of power and a big touch screen in a pod kit, from MTL up to DTL with the 0.2Ω pod. For a smaller 40W kit, see the Digi Pro. For 80W on B coils, see the Aegis Force.
Good to know: the battery is built in, and Boost mode needs the 0.2Ω J pod.
What’s in the Digi Max Box
- Digi Max device
- 2 Geekvape J pods (0.4Ω, 23–28W, installed; 0.6Ω, 16–21W, spare)
- USB-C cable
- Manual and promotional card pack








