dotMod dotPod Max 60W Pod System (Tank & Pod Version)
- Alabama
- Alaska
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- Florida
- Georgia
- Hawaii
- Idaho
- IllinoisNot to Chicago or Cook County
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South CarolinaUntil Feb 1, 2027 (enforcement date)
- South Dakota
- Tennessee
- TexasSome restrictions may apply
- Utah
- Vermont
- Virginia
- Washington
- West Virginia
- Wisconsin
- Wyoming
- Washington, DC
- Military (APO, FPO, DPO)
$37.99
The dotMod dotPod Max is a draw-activated 60W pod system with a built-in battery. It comes with a 5ml dotPod Max tank for dotCoils and a 5ml dotPod Max pod with a built-in coil.
dotMod dotPod Max 60W Pod System (Tank & Pod Version) Review
The dotMod dotPod Max 60W Pod System (Tank & Pod Version) is a draw-activated pod system with a built-in battery and up to 60W. It comes with two ways to vape: a 5ml dotPod Max tank for dotCoils and a 5ml dotPod Max pod with a built-in coil. One button handles the settings, and the airflow is adjustable. See more from dotmod or compare other pod systems.
dotPod Max Highlights
Tank or Pod
Use the dotPod Max tank with dotCoils, or a dotPod Max pod with a built-in mesh coil in 0.4Ω, 0.6Ω or 1.0Ω. Both hold 5ml and fill from the side.
Up to 60W
dotmod’s manual gives 5W to 60W for coils from 0.14Ω to 3.0Ω, with an auto setting and a power cap for each coil range.
One Button
Press it 3 times quickly to adjust the power and 4 times to lock it. The dotPod Max fires when you draw.
Vape While Charging
It charges over USB-C, and dotmod’s manual says it supports pass-through charging.
dotPod Max Specs
Device
- Battery: built in: 2000mAh on the first version, 2100mAh on the current one
- Output: 5–60W
- Resistance range: 0.14–3.0Ω
- Firing: draw-activated
- Controls: one button
- Screen: 0.69-inch on the first version; a larger full-color screen on the current one
- Charging: USB-C, up to 2A; you can vape while it charges
- Body: aluminum
- Safety: 8-second cut-off, short-circuit, overheat, resistance and low-battery warnings
Tank and Pod
- In the box: dotPod Max tank and dotPod Max pod, 5ml each
- Tank coils: dotCoils; dotmod lists the 0.3Ω, 0.6Ω and 0.9Ω, and the 0.15Ω doesn’t fit
- Pods: dotPod Max pods, 0.4Ω, 0.6Ω, 1.0Ω
- Fill: side fill under a sliding cover
- Airflow: airflow wheel
dotPod Max Colors
- Options: Black, Carbon Black, Damas Black, Gunmetal, Purple, Red, Royal Blue, Silver, Tiffany Blue
- Limited editions: Gold Forged Carbon Fiber, Gold Link, Gold Ripple, Gunmetal Link, Silver Link, Silver Ripple
dotPod Max Power by Coil
In auto, the dotPod Max starts at a set power for the coil’s resistance, and you can adjust inside a range. dotmod’s manual gives:
| Coil resistance | Auto setting | Adjustable range |
|---|---|---|
| 0.14–0.25Ω | 50W | 5–60W |
| 0.25–0.50Ω | 28W | 5–40W |
| 0.50–0.85Ω | 20W | 5–24W |
| 0.85–1.2Ω | 16W | 5–20W |
dotmod rates the dotPod Max pods at 5W to 35W (0.4Ω), 5W to 24W (0.6Ω) and 5W to 18W (1.0Ω).
How to Set Up the dotPod Max
- Fill the tank or pod: slide open the e-liquid cover, fill to 80% to 90% so it doesn’t overflow, and close the cover.
- Wake it: press the power button once.
- Set the power: press the button 3 times within 2 seconds, then press and hold to change the wattage.
- Set the airflow: turn the airflow wheel.
- Vape: draw on the mouthpiece to fire.
Who the dotPod Max Is For
The dotMod dotPod Max suits vapers who want one pod system that runs both a dotCoil tank and built-in-coil pods, with a built-in battery and up to 60W. For an 18650 all-in-one with up to 80W and a full-color screen, see the dotmod dotAIO V3.
Good to know: dotmod has made two versions of the dotPod Max. The first has a 2000mAh battery and a 0.69-inch screen; the current one, which includes the Link limited editions, has a 2100mAh battery and a larger full-color screen.
What’s in the dotPod Max Kit
- dotMod dotPod Max device
- dotPod Max tank
- dotPod Max pod
- dotCoils (one with the first version, two with the current one)
- USB-C cable
- 2 replacement O-rings
- User manual
dotMod dotPod Max FAQ
How big is the battery?
It’s built in: 2000mAh on the first version and 2100mAh on the current one, which includes the Link limited editions. It charges over USB-C, and you can vape while it charges.
What’s the difference between the tank and the pod?
The tank takes replaceable dotCoils. The pod has a built-in mesh coil, so you replace the whole pod. Both hold 5ml, and both come in the kit.
Which dotCoils fit the tank?
dotmod lists the 0.3Ω, 0.6Ω and 0.9Ω, and says the 0.15Ω doesn’t fit the dotPod Max. We sell dotCoils in 5-packs.
How do I change the wattage?
Press the button 3 times within 2 seconds, then press and hold to adjust. Press it 4 times to lock or unlock the power.
How does it fire?
dotmod lists the dotPod Max as draw-activated.
Is there a rebuildable option?
Yes. The dotPod Max RBA is a 4ml rebuildable pod for the dotPod Max.
- Reviews
- Questions
USYes really kit very smooth 👌
USNot very good
Haven’t found a model number to match yet but mine seems to be only a 40 W unit. Air flow is bad with the built in coils and not much better with the replaceable ones. Not what I was hoping for
USNew to vaping
One of the best pods I ever had
Compatible With...
Sub Ohm Tanks
Vape Replacement Coils
Replacement Pods & Cartridges
Replacement Pods & Cartridges
You May Also Like
Vape Pod Systems & Kits
Vape Pod Systems & Kits
Vape Pod Systems & Kits
Vape Pod Systems & Kits
