dotmod dotCoil | Replacement Coils Review
dotmod dotCoils are brass single mesh coils, 5 to a pack in individual blister wraps. Each has its rating printed on the box or the coil, from 60W to 80W for the 0.15Ω down to 18W to 22W for the 0.6Ω. They fit the dotAIO V2, dotAIO V2 Lite, dotAIO V3 and other dotmod tanks. See more from dotmod or browse all replacement coils.
dotCoil Specs
Each Coil
- Versions: 0.15Ω, 0.3Ω, 0.6Ω
- Type: single mesh
- Mesh: 316L, printed on the 0.3Ω coil
- Body: brass
- Pack: 5 coils, each in its own blister
- Fits: dotAIO V2, V2 Lite, V3 and Tank V3, dotTank 25mm, dotTank Max, dotStick Revo and Revo V1.5, dotPod Max, dotAMP, dotApollo
All dotCoil Ratings
Here is the rating for each dotCoil, as printed by dotmod:
| dotCoil | Rating |
|---|---|
| dotCoil 0.15Ω | 60–80W (box) |
| dotCoil 0.3Ω | 25–40W (box and coil) |
| dotCoil 0.6Ω | 18–22W (box) |
The dotAIO V2 and V2 Lite kits come with the 0.3Ω and 0.7Ω.
How to Change a dotCoil
- Take the tank out: remove the tank from your device.
- Swap the coil: on dotAIO tanks, turn the tank upside down, pull off the airflow ring and the old coil, put the new coil in and push the ring back on until it clicks.
- Fill it: fill the tank and let the new coil soak for a few minutes.
- Set the power: stay inside the coil’s rating.
Good to know: dotmod says the 0.15Ω dotCoil doesn’t fit the dotStick Revo, dotStick Revo V1.5 or dotPod Max. The other resistances do.
What’s in the Pack
- 5 dotmod dotCoils in the resistance you choose, each in its own blister


