Vaporesso XROS 6 Pod System Kit Review
The Vaporesso XROS 6 Pod System Kit is a refillable pod vape with a built-in 1800mAh battery and a 0.88-inch TFT screen. It’s made for mouth-to-lung (MTL) vaping, and its side airflow control opens up for a looser draw. It fires up to 30W and takes every XROS pod. See more from Vaporesso or compare other pod systems.
XROS 6 Highlights
TFT Screen, Draw or Button
The XROS 6 has a 0.88-inch TFT screen. You can fire it by drawing on the pod or by pressing the button.
Fast USB-C Charging
The battery charges over USB-C at up to 9V/2A or 5V/3A. Vaporesso says 10 minutes of charging gives about 50%.
60-Second Smart Prime
After a refill, hold the button for 3 seconds to start Smart Prime. It counts down 60 seconds, so the coil is soaked before your first puff.
COREX 3.0 Pods, 3ml
The XROS 6 comes with 0.6Ω and 0.8Ω COREX 3.0 mesh pods that hold 3ml each. They fill from the top, and every XROS pod fits.
XROS 6 Specs
Device
- Power: up to 30W
- Modes: ECO, NORMAL and POWER; 0.5W steps with a 0.4Ω pod
- Display: 0.88″ TFT
- Firing: draw or button
- Airflow: adjustable side control
Battery and Charging
- Battery: 1800mAh, built in
- Charging: USB-C, 9V/2A or 5V/3A
Pod
- Pod: XROS pods (COREX 3.0 in the box)
- Capacity: 3ml
- Fill: top fill
- Coils: 0.6Ω and 0.8Ω mesh in the box
Size
- Size: 122 × 24.5 × 14.5mm
XROS 6 Colors
- Options: Abyssal Blue, Aurora Blue, Carbon Fiber Gray, Cosmic Black, Dreamy Pink, Pearl White, Scorching Cloud, Silk Brown, Silk Gray, Silk Green, Slate Black
XROS Pods for the XROS 6
Every XROS pod fits the Vaporesso XROS 6, so you can pick your draw. Here’s how Vaporesso rates each COREX 3.0 pod.
| Pod | Draw | In the box |
|---|---|---|
| 0.4Ω, 3ml | Restricted DTL (RDL), with 0.5W power steps | No |
| 0.6Ω, 3ml | Restricted DTL (RDL) | Yes, installed |
| 0.8Ω, 3ml | MTL | Yes |
| 1.0Ω, 2ml | Tight MTL | No |
| 1.2Ω, 2ml | Ultra-tight MTL | No |
On the XROS 6, the 0.4Ω pod lets you set the power in 0.5W steps. We carry Vaporesso XROS pods in packs of 4. Our XROS pod guide shows how each pod draws and which kits it fits.
How to Set Up the XROS 6
- Charge it: plug in the USB-C cable before you vape the first time.
- Fill the pod: open the fill port on top, fill the pod and close it.
- Prime the coil: hold the button for 3 seconds to start Smart Prime, then wait for the 60-second countdown.
- Set your draw: move the airflow control, then click the button 3 times to change the power mode.
- Lock it: click the button 4 times to lock or unlock it.
Who the XROS 6 Is For
The Vaporesso XROS 6 Pod System Kit suits new and experienced MTL vapers who want a screen and a big battery. The 0.8Ω pod gives an MTL draw, and the 0.6Ω pod gives a looser, restricted DTL draw. Want a smaller kit without a screen? See the XROS 6 MINI. The XROS Pro 2 has a bigger 2000mAh battery. Prefer a touch screen? Try the XROS 5 Nano.
Good to know: the 0.5W power steps need a 0.4Ω pod, which isn’t in the box.
What’s in the XROS 6 Box
- XROS 6 device
- XROS 0.6Ω mesh pod, 3ml (installed)
- XROS 0.8Ω mesh pod, 3ml
- USB-C cable
- User manual and warranty card













