Vaporesso XROS 6 MINI Pod System Review
The Vaporesso XROS 6 MINI Pod System is a compact refillable pod vape with a built-in 1600mAh battery. It’s made for mouth-to-lung (MTL) vaping, and a side control sets the airflow from tight to loose. It fires up to 30W, takes every XROS pod and uses LED lights instead of a screen. See more from Vaporesso or compare other pod systems.
XROS 6 MINI Highlights
About 11mm Shorter
The XROS 6 MINI is about 11mm shorter than the XROS 6, so it slips into a pocket easily.
LED Battery Lights
Instead of a screen, five LEDs show the battery level. Each light stands for about 20% of a full charge.
60s Smart Prime
After you refill the pod, Vaporesso says the coil is soaked in about 60 seconds. That helps you avoid a dry first puff.
Adjustable Airflow
The side airflow control on the XROS 6 MINI moves the draw from a tight MTL pull to a looser one.
XROS 6 MINI Specs
Device
- Power: up to 30W
- Display: none; 5-LED battery indicator
- Airflow: adjustable side control
Battery and Charging
- Battery: 1600mAh, built in
- Charging: USB-C, 5V/2A (cable not included)
Pod
- Pod: XROS pods (COREX 3.0 in the box)
- Capacity: 3ml
- Fill: top fill
- Coils: 0.6Ω mesh in the box
Size
- Size: 110.7 × 24.55 × 14.65mm
XROS Pods for the XROS 6 MINI
Every XROS pod fits the Vaporesso XROS 6 MINI, so you can change the draw. Here’s how Vaporesso rates each COREX 3.0 pod.
| Pod | Draw | In the box |
|---|---|---|
| 0.4Ω, 3ml | Restricted DTL (RDL) | No |
| 0.6Ω, 3ml | Restricted DTL (RDL) | Yes, installed |
| 0.8Ω, 3ml | MTL | No |
| 1.0Ω, 2ml | Tight MTL | No |
| 1.2Ω, 2ml | Ultra-tight MTL | No |
Need spares for your XROS 6 MINI? We carry Vaporesso XROS pods in packs of 4.
How to Set Up the XROS 6 MINI
- Charge it: plug in a USB-C cable before you vape the first time. A cable isn’t in the box.
- Fill the pod: open the fill port on top, fill the pod and close it.
- Let it soak: wait about a minute so the coil can take in the e-liquid.
- Set the airflow: move the side airflow control until the draw feels right.
Who the XROS 6 MINI Is For
The Vaporesso XROS 6 MINI kit suits vapers who want a small, simple kit and don’t need a screen. The 0.6Ω pod in the box gives a looser, restricted DTL draw. For a tighter MTL draw, add 0.8Ω, 1.0Ω or 1.2Ω pods. Want a screen? See the XROS 6. Want a bigger battery? The XROS Pro 2 has 2000mAh.
Good to know: only one pod comes in the box, there’s no USB-C cable, and the LEDs show the battery in steps, not as a percentage.
What’s in the XROS 6 MINI Box
- XROS 6 MINI device
- XROS 0.6Ω mesh pod, 3ml (installed)
- User manual and warranty card
- Reminder card











