Black Friday Sale Ends Nov 3020% off all e-liquid with code BLACKFRIDAY20% off e-liquid: BLACKFRIDAYShop e-liquidShop e-liquid

Vape Kit & Mod Guides

How Long Do Vape Coils Last? When to Change, Prime and Clean Them

See when to change a vape coil, how to prime a vape coil and clean one, plus the types of vape coils.

By the VSS Team Published · 12 min read

How long vape coils last: a coil head, a dropper for priming and the signs it is time to change a vape coil
On this page8 sections
  1. How long coils last
  2. When to change a coil
  3. How to change a coil
  4. How to prime a coil
  5. Cleaning a coil
  6. Types of coils
  7. Our best-selling coils
  8. FAQ

How long do vape coils last? Vaporesso and VOOPOO both put most coils at about one to two weeks of daily use, and some coils are rated by how much e-liquid they vaporize instead. This guide shows when to change a vape coil, how to prime a vape coil so it doesn’t burn, whether you can clean a vape coil, and which types of vape coils suit which draw.

The coil life figures come from the makers’ own guides, and we also list the 8 coil packs our customers buy most.

The short version

  • Most coils last about one to two weeks of daily use, according to Vaporesso and VOOPOO.
  • Some last longer: GeekVape rates its Z XM and B Boost coils for about 50 to 60 mL of e-liquid, and VOOPOO rates its PnP X coils for up to 100 mL.
  • Change a vape coil when it tastes burnt, the flavor fades, vapor drops, or it starts to leak or gurgle.
  • Prime a vape coil with a few drops of e-liquid, and then wait 5 to 10 minutes before you vape.
  • You can’t clean a vape coil that’s built into a pod, and a rinse only clears surface residue from a coil head.
  • Among the types of vape coils, mesh heats more evenly than wire, while the resistance sets whether a coil suits MTL or DTL.

How long do vape coils last?

A coil has no expiry date, because it wears out as you vape. Vaporesso and VOOPOO both say most coils last about one to two weeks of daily use. Some makers rate their coils by e-liquid or by refills instead, so here’s how long vape coils last by the makers’ own numbers:

CoilThe maker’s rating
VOOPOO PnP XUp to 100 mL of e-liquid
GeekVape Z XM (Boost Version)About 50 to 60 mL of e-liquid
GeekVape B (Boost Version)About 50 to 60 mL of e-liquid
GeekVape B MTLAbout 20 to 30 mL of e-liquid
Vaporesso GTX, DTL resistancesAbout 5 to 6 refills
Vaporesso GTX 0.8Ω and 1.2Ω (MTL)About 7 to 8 refills

A coil can last a few days or a few weeks, so it depends on how you vape. High power, long sessions and sweet e-liquid all shorten its life. GeekVape adds that thick, high-VG e-liquid and sweeteners gunk up a coil faster.

How to make a vape coil last longer

Vaporesso and VOOPOO give the same short list of habits that help a coil last:

  • Prime it fully: let the cotton soak before the first puff.
  • Stay in its range: keep the power inside the wattage range on the coil or its box.
  • Pace yourself: avoid chain vaping, because the wick needs time to soak again between puffs.
  • Pick lighter e-liquids: lower-sweetener e-liquid leaves less residue on the coil.
  • Keep it topped up: refill before the tank runs dry, so the wick stays wet.

When to change a vape coil

Change a vape coil when it tells you to, rather than on a set day. VOOPOO lists the signs that a coil is done:

  • A burnt taste: the cotton has scorched.
  • Muted flavor: the coil is no longer wicking well.
  • Less vapor: residue is clogging the coil.
  • Leaking or gurgling: often a sign that the coil is worn.
  • Dark e-liquid: the liquid in the tank turns darker as residue builds up.

A burnt taste from a brand-new coil means something else, though, so check two things before you change a vape coil again: whether it was primed long enough, and whether the power is above its range. Some pods also have the coil built in, such as XROS and OXVA Xlim pods. With those, you change the whole pod instead, so see our replacement pods.

How to change a vape coil

It takes a minute or two to change a vape coil head. These steps follow GeekVape’s and VOOPOO’s guides, and they work for most tanks and coil pods:

  1. Turn it off: switch off the device, and then take the tank or pod off it.
  2. Take out the old coil: unscrew it from the tank’s base, or pull it out of the bottom of the pod.
  3. Prime the new vape coil: drip a few drops of e-liquid onto its cotton, as in the next section.
  4. Fit it firmly: push or screw it in all the way, so it makes good contact.
  5. Fill and wait: refill the tank or pod, close it and wait 5 to 10 minutes.
  6. Start low: set the power at the low end of the coil’s wattage range, and then work up.

Not sure which coil fits? Each tank or pod takes one coil family, so match yours before you order. The quickest way is our Coil & Pod Finder. Pick your device to see the coils and pods in stock that fit it, with each maker’s watt range. Our GeekVape, SMOK, Vaporesso GTX and VOOPOO PnP compatibility guides also list the coils for each tank and kit.

How to prime a vape coil

Priming means soaking the cotton before you fire the coil. If you skip it, the dry cotton can scorch on the first puff, and that burnt taste won’t go away. GeekVape, VOOPOO and Vaporesso all describe the same few steps for how to prime a vape coil:

  1. Drip: add 3 to 5 drops of e-liquid onto the cotton through the top of the coil and its side holes.
  2. Fill: fit the coil, and then fill the tank or pod.
  3. Wait: leave it for 5 to 10 minutes, so the cotton soaks through.
  4. Start low: take your first puffs at the bottom of the coil’s wattage range.

GeekVape’s coil pages give 3 to 5 minutes, while VOOPOO and Vaporesso say 5 to 10. Waiting a little longer never hurts, because a fully soaked wick is what protects the cotton. Thicker e-liquid also soaks in more slowly, so give it the full 10 minutes.

Can you clean a vape coil?

Only up to a point. A pod with the coil built in is sealed, so you can’t clean a vape coil like that at all, and a worn pod means a new pod. With a tank coil head, Vaporesso says a rinse can clear some residue from the metal housing and the outside of the wick. It can’t pull gunk out of the cotton inside, however, and it can’t fix cotton that has already scorched.

If a coil head has only started to dull, here’s how to clean a vape coil the way Vaporesso describes:

  1. Remove it: take the coil out, and pour out the old e-liquid.
  2. Rinse it: run it under warm water until the water runs clear.
  3. Dry it: shake out the water and let it air dry completely, ideally overnight.
  4. Prime it again: soak it with fresh e-liquid before you vape.

Vaporesso also warns that you shouldn’t clean a vape coil by soaking it in vinegar or alcohol, or by firing it empty. If you can’t clean a vape coil, you can still rinse the tank: wash the glass and metal parts in warm water and let them dry. Keep water away from the battery and the device, as VOOPOO notes. Once a coil tastes burnt, a new one is the only real fix.

Types of vape coils

Most coil heads hold a heating element and a cotton wick inside a metal case, and the types of vape coils differ in how that element is built. Here are the main ones you’ll see on a pack:

Mesh coils

A flat sheet of metal mesh. SMOK says its bigger surface heats e-liquid more evenly than a regular coil, which gives more flavor and vapor.

Regular coils

A wound wire coil. These are often MTL coils, such as the 1.4Ω regular coil SMOK made for its Nord kit.

Ceramic coils

Porous ceramic in place of the cotton, or around it. Vaporesso says it gives clean, steady flavor, but it warms up a little slower than bare mesh.

Across all types of vape coils, resistance matters as much as the build. A coil under 1Ω is a sub-ohm coil, made for direct-to-lung (DTL) vaping at higher power. SMOK, for example, designed the 0.6Ω Nord mesh coil for sub-ohm vaping and the 1.4Ω regular coil for mouth-to-lung (MTL) vaping. Vaporesso pairs high-VG e-liquid with sub-ohm DTL coils, while it suits 50/50 e-liquid or nic salts to MTL coils. Our sub-ohm vaping guide and freebase vs salt nicotine guide explain both.

Our best-selling coils

These are the 8 coil packs our customers buy most, starting with the top seller, and every one is in stock. Each card says which tanks or kits it fits, so check yours first. For every coil we carry, browse our replacement coils.

Three boxes of GeekVape Z 0.15Ω XM heads with loose Z series heads in front

1 GeekVape Z Coils

$14.99 0.15Ω to 0.4Ω Pack of 5

GeekVape Z coils are our best-selling coil pack. They fit GeekVape’s Z tanks, such as the Zeus Sub Ohm, Z Fli 2 and Z Subohm Tank 5, and the Aegis Legend 5 kit. GeekVape rates them from 45W to 90W, while its Z XM Boost Version coil lasts about 50 to 60 mL of e-liquid. Shop GeekVape Z coils.

Best for: DTL vapers with a GeekVape Z tank.

Good to know: Despite the Z in its name, the Z Nano 3 tank takes B coils, not Z coils.

SMOK TFV18 Dual Meshed 0.15Ω and Meshed 0.33Ω boxes, 3 pieces each, with loose heads

2 SMOK TFV18 Coils

From $13.99 0.15Ω or 0.33Ω Pack of 3

SMOK TFV18 coils are our best-selling SMOK coils. They come in meshed 0.33Ω or dual meshed 0.15Ω, and SMOK rates both from 80W to 140W, best at 100W to 110W. They fit the SMOK TFV18 tank. Shop SMOK TFV18 coils.

Best for: TFV18 owners who vape at high power.

Good to know: They need a mod that reaches at least 80W, because that’s the bottom of SMOK’s range.

VOOPOO PnP X vape coil boxes in 0.15Ω, 0.3Ω and 0.6Ω, 5 per pack

3 VOOPOO PnP X Coils

$15.99 0.15Ω to 1.0Ω Pack of 5

VOOPOO PnP X coils run from a 0.15Ω DTL coil at 60W to 80W to a 1.0Ω MTL coil at 10W to 13W. VOOPOO also rates them for up to 100 mL of e-liquid. Shop VOOPOO PnP X coils.

Best for: DRAG S3 and Drag H40 Pro owners, or anyone with a PnP X pod or tank.

Good to know: VOOPOO says PnP X coils don’t fit older PnP kits, such as the DRAG X, and original PnP coils don’t fit PnP X kits.

GeekVape B0.3, B0.4 and B0.6 mesh boxes with loose B heads

4 GeekVape B Coils

$14.99 0.2Ω to 1.2Ω Pack of 5

GeekVape B coils fit the Z Nano 3 Tank, as well as the Aegis Mini 5, Aegis Hero 5 and Aegis Force kits. GeekVape rates them from 10W to 58W, so the range covers both an MTL draw and lower-power DTL. Shop GeekVape B coils.

Best for: Aegis Hero 5, Aegis Mini 5 and Aegis Force owners.

Good to know: We stock both the classic and the Boost Version, and GeekVape says the two are fully interchangeable.

Vaporesso GTX 0.2Ω and 0.3Ω mesh vape coil boxes with loose GTX heads in front

5 Vaporesso GTX Coils

From $12.99 0.15Ω to 1.2Ω Pack of 5

Vaporesso GTX coils go in LUXE XR pods, as on the LUXE XR MAX 2, LUXE XR, LUXE X3 and LUXE X PRO. We carry three types of vape coils for those pods: mesh, dual mesh and regular. Vaporesso says its DTL GTX vape coils last about 5 to 6 refills, while the 0.8Ω and 1.2Ω MTL coils last about 7 to 8. Shop Vaporesso GTX coils.

Best for: LUXE kit owners who want to swap the coil, not the whole pod.

Good to know: ARMOUR kits take GTi coils instead, and Vaporesso says GTX and GTi coils aren’t interchangeable.

SMOK RPM 3 boxes in Meshed 0.15Ω and 0.23Ω, printed 40-80W and 20-45W

6 SMOK RPM 3 Coils

From $13.99 0.15Ω or 0.23Ω Pack of 5

SMOK RPM 3 coils fit the Nord 5, Nord GT and other RPM 3 pods. The 0.15Ω mesh runs at 40W to 80W, while the 0.23Ω mesh runs at 20W to 45W. Shop SMOK RPM 3 coils.

Best for: Nord 5 and Nord GT owners.

Good to know: RPM, RPM 2, RPM 3 and RPM 4 coils have similar names, but they don’t swap, so check the name on your old coil.

SMOK V12 Prince Mesh vape coil box with loose V12 Prince heads

7 SMOK TFV12 Prince Coils

From $9.99 30W to 130W Pack of 3

SMOK TFV12 Prince coils fit the TFV12 Prince tank, in 10 versions from the Prince Mesh to the Q4 and X2 Clapton. SMOK rates them from 30W to 130W, depending on the version. Shop SMOK TFV12 Prince coils.

Best for: TFV12 Prince owners who like to try different coil builds.

Good to know: Check the version printed on your old coil before you order, since the 10 versions differ in build and resistance.

FreeMax Mesh Pro heads on each side of their black box

8 FreeMax Mesh Pro Coils

From $14.99 60W to 120W Pack of 3

FreeMax Mesh Pro coils fit the M Pro, M Pro 2 and M Pro 3 tanks. They come in Kanthal double, triple or quad mesh, or SS316L single mesh, rated 60W to 120W by FreeMax. Shop FreeMax Mesh Pro coils.

Best for: M Pro tank owners who want a choice of mesh styles.

Good to know: Each pack holds one mesh style, so check which one your old coil is before you order.

Vape coil FAQ

How long do vape coils last?

Most last about one to two weeks of daily use, according to Vaporesso and VOOPOO. Some makers rate coils by e-liquid instead, so GeekVape’s Z XM and B Boost coils last about 50 to 60 mL, while VOOPOO’s PnP X coils last up to 100 mL.

How often should you change a vape coil?

Change a vape coil when it tells you to, not on a set day. A burnt taste, muted flavor, less vapor, leaking or gurgling all mean it’s time for a new one.

Why does my new coil taste burnt?

It usually wasn’t primed long enough, so the cotton was still dry, or the power is set above its range. Prime a vape coil for 5 to 10 minutes, and then start at the low end of its wattage range.

How long should you prime a vape coil?

To prime a vape coil, VOOPOO and Vaporesso say to wait 5 to 10 minutes after you add e-liquid. GeekVape’s coil pages give 3 to 5 minutes, so 5 minutes or more works for any of them.

Can you clean a vape coil to make it last longer?

Only a little. Vaporesso says you can clean a vape coil head with a warm water rinse, which clears some residue, but it can’t pull gunk out of the cotton or fix scorched cotton. A pod with a built-in coil can’t be cleaned at all, because it’s sealed.

What are the main types of vape coils?

The main types of vape coils are mesh, regular wire and ceramic. SMOK says mesh heats e-liquid more evenly than a regular coil, which gives more flavor and vapor, while the resistance decides whether a coil suits MTL or DTL.

Do all coils fit every tank?

No. Each tank or pod takes its own coil family, such as GeekVape Z coils for Z tanks or GTX coils for LUXE XR pods. Even within one brand, different types of vape coils don’t swap, so match the coil to your tank first.

Time for a fresh coil?

Match the vape coil to your tank, prime it well, and keep a spare pack on hand for when the flavor fades.

Coil life, priming and cleaning steps come from the makers’ own coil guides and pages (GeekVape, Vaporesso, VOOPOO and SMOK). Fit, resistance and wattage come from our product pages. We ranked the coils by packs sold in paid orders over the last 90 days, and prices and stock are from November 19, 2026. When you charge your kit, follow the FDA’s tips to help avoid vape battery fires. Nicotine is addictive. You must be 21 or older to buy vape products, under the federal Tobacco 21 law. Some products can’t ship to every state, so check our shipping guide before you order.

Written by

VSS Team

We build every guide from the products we stock: specs from our product pages, prices from the day it goes live, and rankings from our own orders. When a product, price or state rule changes, we update the guide and its date.

How we write our guides All 83 guides

Keep reading