Freemax Fireluke Mesh Pro Replacement Coils (Pack of 3) Review
Freemax Fireluke Mesh Pro Replacement Coils are FreeMax’s M Pro mesh coils, 3 to a pack: Kanthal double, triple, quad and quintuple mesh, plus an SS316L single mesh for temperature control. FreeMax rates them from 60W to 90W for the double up to 80W to 120W for the quad, and lists them for its M Pro, M Pro 2 and M Pro 3 tanks. See more from FreeMax or browse all replacement coils.
Mesh Pro Coil Specs
Each Coil
- Versions: Double 0.2Ω, Triple 0.15Ω, Quad 0.15Ω, Quintuple 0.15Ω (Kanthal); Single 0.12Ω (SS316L)
- Fit: screw-in
- Pack: 3 coils
- Fits: FreeMax M Pro, M Pro 2 and M Pro 3; our box also lists the Fireluke and Fireluke Pro
Mesh Pro Coil Ratings
FreeMax gives these ratings:
| FreeMax Mesh Pro coil | FreeMax rating |
|---|---|
| Double 0.2Ω | 60–90W, best 80W |
| Triple 0.15Ω | 80–110W, best 100W |
| Quad 0.15Ω | 80–120W, best 100W |
| Quintuple 0.15Ω | 80–100W, best 90W |
FreeMax rates the SS316L single Mesh Pro coil at 400°F to 550°F in temperature control, best 500°F. The same tanks take FreeMax’s 904L M coils.
How to Change a Mesh Pro Coil
- Take the tank off: unscrew it from your mod, then unscrew the 510 base.
- Swap the coil: unscrew the old coil, screw in the new one and screw the base back on firmly.
- Refill and wait: fill the tank and wait at least 5 minutes before vaping on a new coil.
- Set the power: start at the low end of the coil’s rating, and change the coil when the taste turns burnt or flat.
Good to know: The SS316L single is rated in degrees, not watts, so it needs a mod with temperature control.
What’s in the Pack
- 3 coils in the version you choose



