VOOPOO DRAG 6 Review: Specs, Tank and Who It’s For

Our DRAG 6 review in short: VOOPOO packed a 4400mAh battery and up to 220W into a box mod kit with a leather grip. It comes with the UFORCE-X 2 tank and two cloud coils, so it’s ready for big vapor out of the box. It also has temperature control and a 510 thread, so it can grow with you.

Updated October 10, 2026

To begin with, we based this DRAG 6 review on our product pages and on VOOPOO’s coil chart. We’ve carried the kit since May. The PnP X coils it uses include 0.15, 0.2 and 0.3 ohm cloud coils, and the VOOPOO DRAG 6 has the power to run all three.

DRAG 6 specs

First, here’s the VOOPOO DRAG 6 at a glance, from our product pages.

Which coil should you use in the DRAG 6?

First, the UFORCE-X 2 tank runs VOOPOO’s PnP X coils. So here’s VOOPOO’s chart from our coil page, with the draw style and watt range for each one:

In short, DTL means direct-to-lung, the most open draw. RDL, or restricted direct lung, is a bit tighter, while MTL, or mouth-to-lung, is the tightest. In general, start at the low end of each range, and then turn it up slowly.

Next, here’s where the VOOPOO DRAG 6 stands out. Our DRAG S3 review covers VOOPOO’s smaller 60W kit, which only reaches the bottom of the 0.15 ohm range. In contrast, the DRAG 6 can run that coil at its full 80W, with plenty of power left over.

Also, all seven PnP X coils are in stock at our store, at $15.99 for a 5-pack. Since cloud coils use more juice, our PG and VG guide can help you pick a high-VG e-liquid that suits them.

The UFORCE-X 2 tank

The kit’s UFORCE-X 2 tank holds 5mL, and it fills from the top. Its airflow is on top too, and it uses a wide 810 drip tip. In addition, the box comes with a spare glass tube and spare seals.

Need a second tank? We also sell the tank on its own for $33.99, in black, gunmetal or silver. Then you can keep two flavors filled and swap between them.

Temperature control and other atomizers

The VOOPOO DRAG 6 has a few modes, but two matter most. First, most people use wattage mode, where you set the power with the dial. Second, temperature control caps how hot the coil gets, from 200°F to 600°F.

However, TC mode only works with coils made of nickel, titanium or stainless steel wire. So it’s mainly for people who build their own coils. Because the mod has a 510 thread and fires down to 0.05 ohm, it also works with other tanks, RDAs and RTAs. If you’re new to box mod kits, though, the stock tank and wattage mode are all you need.

Battery, charging and safety

One big plus in this DRAG 6 review is the battery. It holds 4400mAh, it’s built in, and it charges over USB-C. As a result, you don’t need to buy 18650 or 21700 cells, or check their wraps. Meanwhile, the 1.66-inch color screen shows your settings and battery level.

Whenever you charge it, follow the FDA’s tips to help avoid vape battery fires. For example, charge it on a clean, flat surface, away from anything that can catch fire. Also, don’t use a phone or tablet charger, and don’t charge it overnight.

DRAG 6 review: who should buy it?

Our DRAG 6 review verdict is simple. Get it if you want a powerful box mod kit with a big battery built in. It runs every PnP X coil at full power, and it has temperature control for when you start building coils. On the other hand, if you mostly vape nic salts, a pod kit is a better fit, since high-power vaping isn’t meant for strong salt nicotine.

Still deciding? For example, our sub-ohm vaping guide explains how low-ohm coils work. You can also compare the rest of our mod kits.

DRAG 6 FAQ

This DRAG 6 review uses specs from our product pages, with prices and stock from the date above. Also, coil watt ranges are VOOPOO’s ratings. Some of these products can’t ship to every state, so check our shipping guide. Nicotine is addictive. You must be 21 or older to buy vape products, under the federal Tobacco 21 law.