VOOPOO DRAG 6 220W Starter Kit Review
The Voopoo DRAG 6 220W Starter Kit pairs a 5W to 220W box mod, with a built-in 4400mAh battery, with the 5ml UFORCE-X Tank II for PnP X coils. A wheel on top sets the power, and a 1.66-inch screen shows your settings. It has Smart, RBA and temperature control modes. See more from Voopoo or compare other box mod kits.
DRAG 6 Highlights
5W to 220W
The Voopoo DRAG 6 runs Smart mode, which sets the power for your coil, RBA mode for the full range, and temperature control.
4400mAh Built-In Battery
Two built-in cells give 4400mAh. It charges over USB-C at up to 5V/3A.
Control Wheel
Turn the wheel on top to set the power. The 1.66-inch screen shows your settings.
UFORCE-X Tank II
The 5ml top-fill tank takes every PnP X coil, from 0.15Ω to 1.0Ω.
DRAG 6 Specs
Mod
- Battery: 4400mAh, built in (two cells)
- Output: 5–220W
- Resistance: 0.05–3.0Ω
- Modes: Smart, RBA, temperature control (TC and TCR)
- TC wire: Ni200, titanium, SS316, SS430
- TC range: 200–600°F
- Controls: control wheel and fire button
- Lock: touch, double-click or always unlocked
- Screen: 1.66-inch TFT
- Charging: USB-C, 5V/3A
- Body: zinc alloy
Tank
- Tank: UFORCE-X Tank II, 5ml
- Size: 29 × 57.6mm
- Fill: top fill
- Airflow: adjustable, top
- Drip tip: 810
- Coils: PnP X, 0.15–1.0Ω
- Body: stainless steel and glass
Colors
- Options: Black, Blue, Brown, Green, Metal Gray, Red, Silver
DRAG 6 PnP X Coils and Wattage
The DRAG 6 kit’s tank takes every PnP X coil. Voopoo rates them like this:
| Coil | Voopoo rating |
|---|---|
| PnP X 0.15Ω | DTL, 60–80W |
| PnP X 0.2Ω | DTL, 40–60W |
| PnP X 0.3Ω | DTL and RDL, 32–40W |
| PnP X 0.45Ω | RDL, 25–32W |
| PnP X 0.6Ω | MTL and RDL, 18–23W |
| PnP X 0.8Ω | MTL, 12–16W |
| PnP X 1.0Ω | MTL, 10–13W |
The 0.15Ω and 0.3Ω come in the box. We sell PnP X coils in all seven resistances.
How to Set Up the DRAG 6
- Charge it: plug in the USB-C cable from the box.
- Fit a coil: push a PnP X coil into the tank’s base until it sits flush.
- Fill and wait: open the top cap, fill the tank and give the coil 5 minutes to soak.
- Set the power: use Smart mode, or start at the low end of your coil’s range in RBA mode.
- Pick a lock: press the fire button three times for the menu, then choose touch, double-click or no lock.
Who the DRAG 6 Is For
The Voopoo DRAG 6 suits vapers who want a powerful box mod kit with a built-in battery and the full PnP X coil range. For a kit that runs on two 18650s you can swap, see the DRAG 5. For a smaller pod mod on the same coils, see the DRAG S3.
Good to know: The wheel is slow for big wattage changes, and it takes a moment to learn which way turns the power up.
What’s in the DRAG 6 Box
- Voopoo DRAG 6 mod (4400mAh, built in)
- UFORCE-X Tank II, 5ml
- PnP X 0.15Ω and 0.3Ω coils
- PnP X platform card
- Spare 5ml glass
- Silicone rubber pack
- USB-C cable
- User manual







