Lost Vape Centaurus N200 Starter Kit Review
The Lost Vape Centaurus N200 Starter Kit pairs the Centaurus N200, a 200W box mod for two 18650 batteries (not included), with the 5ml Centaurus Sub Ohm Tank for direct-lung vaping. The mod runs on Lost Vape’s Quest 2.0 chip with a 0.96-inch TFT screen, and the tank takes UB Max coils. See more from Lost Vape or browse all box mod kits.
Centaurus N200 Highlights
5W to 200W
Two 18650 batteries power the Quest 2.0 chip from 5W to 200W, and the 0.96-inch TFT screen shows your settings.
Normal and DIY Modes
Normal mode is for coil tanks like the one in the box. DIY mode is for rebuildable 510 RBA setups, where you build your own coil.
On/Off Switch
A switch turns the mod fully on or off, and the battery level shows on the screen and an LED.
Swappable Panels
Lost Vape made the translucent matte side panels replaceable, so you can swap them for a different look.
Centaurus N200 Specs
N200 Mod
- Power: 5W to 200W
- Chipset: Lost Vape Quest 2.0
- Modes: Normal and DIY (for RBA setups)
- Display: 0.96-inch TFT
- Firing: fire button
- Locks: through the multifunction button, plus an on/off switch
Battery and Charging
- Batteries: two 18650s, not included
- Battery voltage: 6.0V to 8.4V
- Charging: USB-C, 5V/2.35A per Lost Vape
- Safety: low-battery, open-circuit, short-circuit, 10-second and overheat protection
N200 Kit Tank
- Tank: Centaurus Sub Ohm Tank
- Capacity: 5ml
- Fill: top fill
- Airflow: adjustable
- Coils: UB Max; 0.15Ω X1 and 0.2Ω X2 in the box
- Body: glass and stainless steel
Size and Weight
- Mod size: 92.6 × 52.8 × 27.6mm
- Tank size: 30 × 56.15mm
- Mod weight: 108g
- Mod body: PC, zinc alloy and stainless steel
UB Max Coils and Wattage
The Centaurus Sub Ohm Tank in the N200 kit takes Lost Vape’s UB Max coils. These are the ratings printed on the coils:
| Coil | Resistance | Mesh | Wattage | In the box |
|---|---|---|---|---|
| UB Max X1 | 0.15Ω | Ni80 | 80W to 120W | Yes |
| UB Max X2 | 0.2Ω | Ni80 | 60W to 80W | Yes |
| UB Max X3 | 0.3Ω | Kanthal (KTR) | 40W to 60W | No |
Batteries
Use a matched pair of high-drain 18650s from a known brand, and charge, use and replace them together. Don’t charge batteries overnight, and carry spares in a case. The FDA has more battery safety tips.
How to Set Up the Centaurus N200
- Add batteries: take off the panel over the battery bay and put in two charged 18650s, matching the + and − marks.
- Switch it on: turn the on/off switch on.
- Fill and prime: fill the tank and let the coil soak for a few minutes before your first puff.
- Set the power: start at the low end of the coil’s range: 80W for the X1 0.15Ω or 60W for the X2 0.2Ω.
Who the Centaurus N200 Is For
The Centaurus N200 kit suits direct-lung vapers who want a dual-battery box mod with a sub-ohm tank, and its DIY mode suits those who build their own coils. For other dual-18650 kits, see the GeekVape Aegis Legend 5, the SMOK X-Priv Plus or the Voopoo Drag 5.
Good to know: Batteries aren’t included, and both coils in the box are rated for 60W or more, so the kit isn’t set up for mouth-to-lung vaping.
What’s in the Centaurus N200 Box
- Centaurus N200 box mod
- Centaurus Sub Ohm Tank (5ml)
- UB Max X1 0.15Ω coil
- UB Max X2 0.2Ω coil
- Spare glass tube
- Spare parts
- USB-C cable
- User manual
- Warranty card
Batteries are sold separately.




