New

Five VOOPOO VINCI E80 pod kits in Purple-Gold Gradient, Orange-Red Gradient, Spray Black, Metal Gray and Gold

VOOPOO VINCI E80 pod kit in Metal Gray next to its box

VOOPOO VINCI E80 pod kit in Rose Red next to its box

VOOPOO VINCI E80 pod kit in Green next to its box

VOOPOO VINCI E80 pod kit in Purple-Gold Gradient next to its box

VOOPOO VINCI E80 pod kit in Orange-Red Gradient next to its box

VOOPOO VINCI E80 Pod Kit

Name: Vape Society Supply
Price range: $$

Brand: Voopoo

Original price was: $49.99.Current price is: $34.99.

The Voopoo VINCI E80 Pod Kit runs 5W to 80W from a built-in 3000mAh battery and takes 5ml VINCI E pods, with a 0.3Ω and a 0.6Ω pod in the box.

Local Business Pickup Available Choose a nearby PUDO pickup location at checkout.

Description

VOOPOO VINCI E80 Pod Kit Review

The Voopoo VINCI E80 Pod Kit runs 5W to 80W from a built-in 3000mAh battery. It takes 5ml VINCI E pods with the coil built in. The 0.3Ω pod in the box is rated for RDL and DTL, and the 0.6Ω for RDL to loose MTL. It also fits VINCI PnP X pods, which take PnP X coils. See more from Voopoo or compare other pod kits.

VINCI E80 Highlights

Up to 80W

Set anywhere from 5W to 80W. The 3000mAh battery is built in and charges over USB-C.

No Coil Changes

VINCI E pods have the coil built in. When the taste turns flat or burnt, fit a new pod.

Takes PnP X Coils Too

Want to change coils instead? VINCI PnP X pods fit, with PnP X coils from 0.15Ω to 1.0Ω.

1.47-Inch Color Screen

It shows the battery, puff count, power and resistance, with three themes to pick from.

VINCI E80 Specs

Device

Power: 5W to 80W, for 0.15Ω to 1.0Ω
Chipset: GENE TT 2.0
Display: 1.47-inch color TFT, 3 themes
Firing: fire button
Locks: lock switch on the side

Battery and Charging

Batteries: built-in 3000mAh
Charging: USB-C, 5V/2A
Safety: 8-second cutoff, short-circuit, overcharge, output overcurrent, low-battery, over-temperature and max-power protection

Pod

Pod: VINCI E, 0.3Ω and 0.6Ω in the box
Capacity: 5ml
Fill: top side, under a silicone tab
Airflow: adjustable slider on the side
Coils: built into VINCI E pods; VINCI PnP X pods take PnP X coils

Size and Weight

Size: 113.5 × 35 × 23.6mm
Weight: 88.8g without a pod

VINCI E80 Pods and Wattage

Voopoo rates the VINCI E pods like this:

VINCI E pod	Voopoo rating	In the box
0.3Ω	RDL and DTL, 32–40W	Yes
0.6Ω	RDL to loose MTL, 18–23W	Yes
0.8Ω	tight MTL, 12–16W	No

We sell VINCI E pods in all three resistances, 2 per pack. For coils you can change, VINCI PnP X pods take PnP X coils from 0.15Ω (60–80W) to 1.0Ω (10–13W).

How to Set Up the VINCI E80

Charge it: plug in the USB-C cable from the box.
Fill the pod: lift the silicone tab on the pod’s top side, fill and press it closed. The pod can stay in.
Let it soak: wait a few minutes after filling a new pod.
Set the power: start at the low end of the pod’s range, such as 32W for the 0.3Ω pod or 18W for the 0.6Ω.
Lock it: slide the lock switch on the side before it goes in a pocket.

Who the VINCI E80 Is For

The Voopoo VINCI E80 Pod Kit suits RDL and DTL vapers who want 80W and a 3000mAh battery in a pod kit. Its VINCI E pods need no coil changes, and VINCI PnP X pods let you move to PnP X coils later. For a pod mod with a touch fire button, see the DRAG S3. For a small MTL kit, see the Uwell Caliburn AZ3.

Good to know: the airflow never closes all the way, because a fixed air hole on one side stays open. It suits RDL and lung hits better than a tight MTL draw.

What’s in the VINCI E80 Box

Voopoo VINCI E80 device
VINCI E pod, 0.3Ω, 5ml
VINCI E pod, 0.6Ω, 5ml
USB-C cable
PnP X platform compatibility guide
User manual

FAQ

Voopoo VINCI E80 FAQ

Does the VINCI E80 need batteries?

No. It has a built-in 3000mAh battery that charges over USB-C at 5V/2A, and a cable comes in the box.

Which pods fit the VINCI E80?

Voopoo's VINCI E pods, in 0.3Ω, 0.6Ω or 0.8Ω, and VINCI PnP X pods, which take PnP X coils. We sell VINCI E pods and VINCI PnP X pods.

Is the VINCI E80 good for MTL?

It suits RDL and lung hits best. Voopoo rates the 0.8Ω VINCI E pod for tight MTL at 12W to 16W, but the airflow can't close all the way, so the draw stays airier than on a tight MTL pod kit.

How do I fill a VINCI E pod?

Lift the silicone tab on the pod's top side and fill it. You don't need to take the pod out.

Can I lock it?

Yes. A lock switch on the side keeps it from firing in a pocket.

How is it different from the DRAG S3?

The DRAG S3 goes to 60W, has a touch fire button and a 0.96-inch screen, and takes DRAG-style PnP X pods with coils you change. The VINCI E80 goes to 80W, has a 1.47-inch screen and takes VINCI E pods with the coil built in, or VINCI PnP X pods.