Lost Vape URSA Nano Pro 2 30W Pod System Review
The Lost Vape URSA Nano Pro 2 is a 30W pod system with a built-in 1000mAh battery, a 0.42-inch OLED screen and adjustable airflow for MTL or RDL vaping. It takes 2.5ml URSA cartridges, and a 0.6Ω and a 0.8Ω cartridge come in the box. See more from Lost Vape or browse all pod systems.
URSA Nano Pro 2 Highlights
5W to 30W
Lost Vape’s Quest 2.0 chip sets the power from 5W to 30W, and the 0.42-inch OLED screen shows your settings.
Adjustable Airflow
The airflow control sets a tighter or looser draw, and Lost Vape rates it for both MTL and RDL vaping.
1000mAh Battery
The built-in battery charges over USB-C. The ring-shaped button breathes purple while it charges and stays purple when it’s full.
URSA Cartridges
The 2.5ml cartridges fill from the side and hold on with magnets. Reviewers report it takes the original URSA cartridges as well as the V2 ones in the box.
URSA Nano Pro 2 Specs
Nano Pro 2 Device
- Power: 5W to 30W
- Chipset: Lost Vape Quest 2.0
- Display: 0.42-inch OLED
- Battery: 1000mAh, built in
- Charging: USB-C, 5V/1A input
- Safety: short-circuit protection and a 10-second puff cutoff
Pod
- Pod: URSA Cartridge V2, 0.6Ω and 0.8Ω in the box
- Capacity: 2.5ml
- Fill: side fill, under a silicone plug
- Connection: magnetic
- Airflow: adjustable, for MTL or RDL
Size and Weight
- Size: 113 × 24 × 14.8mm
- Weight: 64g
- Body: zinc alloy and plastic
URSA Pods and Resistances
The Nano Pro 2 comes with two V2 cartridges. We sell spare Ursa pods in five resistances:
| Resistance | In the box | Spare 3-packs |
|---|---|---|
| 0.6Ω | Yes | Yes |
| 0.8Ω | Yes | Yes |
| 1.0Ω | No | Yes |
| 1.2Ω | No | Yes |
| 1.4Ω | No | Yes |
Lost Vape publishes no wattage rating for these pods. Each pod has its own coil, so you replace the whole pod when the taste turns burnt or flat.
How to Set Up the URSA Nano Pro 2
- Charge it: plug the USB-C cable into the device. The ring button breathes purple while it charges and stays purple when it’s full.
- Fill the pod: lift the silicone plug on the side of the pod, fill it with e-liquid and press the plug back in firmly.
- Fit the pod: push the pod into the top of the device until the magnets hold it, and let a new pod soak for a few minutes before the first puff.
- Set the airflow and power: slide the airflow control to tighten or loosen the draw, and start at a low power setting.
Who the URSA Nano Pro 2 Is For
The Lost Vape URSA Nano Pro 2 suits vapers who want a small pod system with a screen and adjustable power for MTL or RDL vaping. For other 30W pod systems, see the Vaporesso XROS Pro 2, the GeekVape Wenax Q Pro or the OXVA XLIM Pro 2.
Good to know: The 0.42-inch screen is small, and Lost Vape publishes no wattage rating for its URSA pods.
What’s in the URSA Nano Pro 2 Box
- Lost Vape URSA Nano Pro 2 device
- 0.6Ω URSA Cartridge V2 (2.5ml)
- 0.8Ω URSA Cartridge V2 (2.5ml)
- Lanyard
- O-ring
- USB-C cable
- User manual
- Warranty card









