GeekVape GO Pod System Review
The Geekvape GO Pod Kit has a built-in 1500mAh battery and a 10ml refillable pod with a 0.8Ω dual mesh coil. Refill the pod about 3 times, then swap in a new one and keep the device. See more from Geekvape or compare other pod kits.
GO Pod Kit Highlights
Refill, Then Replace the Pod
Geekvape rates each 10ml pod for 3 refills, about 30ml in all. Then you swap the pod and keep the device.
Normal and Turbo Modes
Normal mode runs one of the two mesh coils for smoother vapor. Turbo runs both for more vapor and flavor.
4-Level Airflow Dial
A dial on top of the pod goes from a tight MTL draw to an open RDL draw.
See Your E-Liquid
A window shows how much e-liquid is left, and the screen shows the battery level and mode.
GO Pod Kit Specs
Mod
- Modes: Normal and Turbo
- Display: battery level and mode
Battery and Charging
- Batteries: built-in 1500mAh
- Charging: USB-C, 5V/1.5A
Pod
- Pod: Geekvape GO pod
- Capacity: 10ml
- Coil: 0.8Ω dual mesh, built in
- Airflow: 4-level dial on top, tight MTL to open RDL
- Pod life: about 3 refills, per Geekvape
Size and Weight
- Size: 94 × 54 × 27.85mm
GO Pod Kit Airflow Levels
The dial on top of the GO pod has 4 settings. The labels are Geekvape’s.
| GO airflow dial | Draw |
|---|---|
| Level 1 | Tight MTL |
| Level 2 | Loose MTL |
| Level 3 | Restricted RDL |
| Level 4 | Open RDL |
Geekvape doesn’t give a wattage for the 0.8Ω pod. We carry Geekvape GO pods in packs of 2.
How to Set Up the GO Pod Kit
- Charge it: plug the GO into a USB-C charger.
- Fill it: fill the 10ml pod, then wait 3 minutes before your first puff, as Geekvape says to on the first fill.
- Set the draw: turn the dial on top of the pod, from tight MTL to open RDL.
- Pick a mode: switch between Normal and Turbo.
Who the GO Pod Kit Is For
The Geekvape GO suits vapers who want a big refillable pod and fewer refills, from a tight MTL draw to an open RDL. For a kit you refill without swapping pods, see the Geekvape Kloud. For a tough kit with a color screen, see the Aegis Nano 3.
Good to know: the battery is built in, and Geekvape doesn’t list a USB cable in the box.
What’s in the GO Pod Kit Box
- GO device
- Geekvape GO pod, 10ml, 0.8Ω dual mesh
- Manual
- Warning and info cards






