dotAIO V2 Lite 75W Pod System | dotmod Review
The dotAIO V2 Lite 75W Pod System is an 18650 all-in-one with a translucent body and interchangeable doors. It puts out about 8W to 75W with auto, power, bypass and temperature control modes, and takes dotCoils in a 2ml tank. See more from dotmod or compare other pod systems.
dotAIO V2 Lite Highlights
Up to 75W
The dotAIO V2 Lite runs from about 8W to 75W, depending on the coil and auto level, with power, bypass and nickel, titanium and stainless steel temperature control modes.
Four Auto Levels
Auto mode has very soft, soft, medium and strong levels. Switch between them with the + and – buttons.
Stealth Mode
The settings menu changes the display color and brightness and turns on stealth mode, which switches off the lights and screen.
Swap the Doors
dotmod sells V2 Lite doors in seven colors, and the 2ml tank takes dotCoils from 0.15Ω to 1.0Ω.
dotAIO V2 Lite Specs
Device
- Battery: one 18650 rated above 25A (not included)
- Output: about 8–75W
- Resistance range: 0.08–2.5Ω
- Modes: auto (4 levels), power, bypass, temperature control (Ni, Ti, SS)
- Firing: power button
- Screen: LCD; color, brightness and stealth mode in settings
- Charging: USB-C; you can vape while it charges
- Safety: 10-second cut-off, short-circuit and overheat (75°C) protection, low-battery and dry-coil warnings
Tank
- In the box: 2ml PCTG tank
- Coils: dotCoils, 0.15–1.0Ω
- Fill: side fill under a silicone plug
- Airflow: airflow control ring
V2 Lite Colors
- Options: Clear, Green, Orange, Purple, Red, Smoke, Tiffany Blue
How to Set Up the V2 Lite
- Fit a battery: lift off the battery door, lay the ribbon across the tray, insert an 18650 rated above 25A matching the + and – marks, and close the door over the ribbon.
- Fill the tank: hold the tank with the silicone plug up, open the plug, fill through the side hole without overfilling, and push the plug back in.
- Turn it on: press the power button 5 times quickly.
- Pick a mode: press the power button 3 times, choose with + or -, then press it once to select.
- Set the airflow: turn the airflow control ring.
Who the V2 Lite Is For
The dotAIO V2 Lite suits vapers who want a see-through all-in-one with full wattage and temperature control on a replaceable 18650. For an aluminum body with glass doors, see the dotmod dotAIO V2. For a 0.96-inch full-color screen and up to 80W, see the dotmod dotAIO V3.
Good to know: The V2 Lite doesn’t come with a battery. It takes one 18650, and dotmod says to use a cell rated above 25A.
What’s in the Box
- V2 Lite device
- 2ml PCTG tank
- Airflow control base
- Tank plug
- Silicone bumper replacement
- Two dotCoils: 0.3Ω and 0.7Ω
- 2 drip tips
- 6 O-rings
- USB-C cable
The 18650 battery isn’t included.







