VOOPOO DRAG X2 80W Pod System

The Voopoo DRAG X2 80W Pod System runs on one 18650 battery and fires PnP X coils from 5W to 80W in a 5ml side-fill PnP X pod. A 0.96-inch screen shows your settings, and a pod and two coils come in the box. See more from Voopoo or compare other pod systems.

DRAG X2 Highlights

DRAG X2 Specs

DRAG X2 PnP X Coils and Wattage

The DRAG X2 takes every PnP X coil. Voopoo rates them like this:

The 0.15Ω and 0.3Ω come in the box. We sell PnP X coils and PnP X pods. Our coil compatibility guide shows how each coil draws and which kits it fits.

Batteries

The DRAG X2 needs a high-drain 18650 from a known brand. Don’t charge batteries overnight, and carry spares in a case. The FDA has more battery safety tips.

How to Set Up the DRAG X2

1. Add a battery: open the battery door and fit a charged 18650, matching the markings.
2. Fit a coil: push a PnP X coil into the base of the pod until it sits flush.
3. Fill and wait: fill through the side port to about two-thirds, close the plug and give the coil 5 minutes to soak.
4. Turn it on: press the fire button five times.
5. Set the power: start at the low end of your coil’s range.

Who the DRAG X2 Is For

The Voopoo DRAG X2 suits vapers who want a pod mod with a swappable 18650 battery and the full PnP X coil range. For a built-in 3000mAh battery on the same pods and coils, see the DRAG S3.

What’s in the DRAG X2 Box

• Voopoo DRAG X2 device
• PnP X Cartridge DTL, 5ml
• PnP X 0.15Ω and 0.3Ω coils (one fitted)
• PnP X platform card
• USB-C cable
• User manual

The 18650 battery is not included.