VOOPOO Drag H40 Pro Pod Mod Kit
- Alabama
- Alaska
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- Florida
- Georgia
- Hawaii
- Idaho
- IllinoisNot to Chicago or Cook County
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South CarolinaUntil Feb 1, 2027 (enforcement date)
- South Dakota
- Tennessee
- TexasSome restrictions may apply
- Utah
- Vermont
- Virginia
- Washington
- West Virginia
- Wisconsin
- Wyoming
- Washington, DC
- Military (APO, FPO, DPO)
Original price was: $49.99.$38.99Current price is: $38.99.
The Voopoo DRAG H40 Pro Pod Mod Kit has a 2450mAh battery, 5W to 40W, a 0.72-inch screen and a 5ml side-fill PnP X pod for PnP X coils.
Most orders ship within 24 hours on business days, except holidays. Orders placed on weekends or major holidays start processing the next business day.
| Option | Under $99 | $99 or more* |
|---|---|---|
| Standard shipping3–7 business days once shipped | $8.00 | FREE |
| PUDOpoint pickup3–5 business days, at a local counter | $8.00 | FREE |
| Adult signature (21+)Every shipped order | $8.00 | $8.00 |
Federal law requires an adult signature on every vape delivery: someone 21 or older signs and shows a valid photo ID.
Want to be notified when this product is back in stock?
VOOPOO Drag H40 Pro Pod Mod Kit Review
The Voopoo DRAG H40 Pro Pod Mod Kit has a 2450mAh battery and runs PnP X coils from 5W to 40W in a 5ml side-fill PnP X pod. A 0.72-inch screen shows your settings, and Smart mode suggests a wattage for the coil you fit. A pod and two coils come in the box. See more from Voopoo or compare other pod systems.
DRAG H40 Pro Highlights
2450mAh Battery
A built-in 2450mAh battery charges over USB-C at 5V/2A.
5W to 40W
The Voopoo DRAG H40 Pro reads the coil you fit and suggests a wattage. You can raise or lower it from there.
PnP X Pod
The 5ml pod fills from the side and comes in MTL and DTL versions. The airflow control sits on top.
Leather Wrap
A leather wrap covers most of the zinc alloy body.
DRAG H40 Pro Specs
Device
- Battery: 2450mAh, built in
- Output: 5–40W
- Resistance: 0.3–3.0Ω
- Firing: fire button
- Screen: 0.72-inch TFT
- Charging: USB-C, 5V/2A
- Body: zinc alloy and leather
Pod
- Pods: PnP X cartridge, MTL or DTL, 5ml
- Fill: side fill
- Airflow: adjustable, top
- Coils: PnP X, 0.3–1.0Ω
Colors
- Options: Cocoa Red, Glow Pink, Gray Metal, Lake Blue, Modern Red, Moss Green, Snow Blue, Spray Black
DRAG H40 Pro PnP X Coils and Wattage
The DRAG H40 Pro tops out at 40W, and its range starts at 0.3Ω. These PnP X coils suit it, and Voopoo rates them like this:
| Coil | Voopoo rating |
|---|---|
| PnP X 0.3Ω | DTL and RDL, 32–40W |
| PnP X 0.45Ω | RDL, 25–32W |
| PnP X 0.6Ω | MTL and RDL, 18–23W |
| PnP X 0.8Ω | MTL, 12–16W |
| PnP X 1.0Ω | MTL, 10–13W |
The 0.15Ω and 0.2Ω PnP X coils are below its 0.3Ω minimum. We sell PnP X coils and PnP X pods. Our coil compatibility guide shows how each coil draws and which kits it fits.
How to Set Up the DRAG H40 Pro
- Charge it: plug in the USB-C cable from the box.
- Fit a coil: push a PnP X coil into the base of the pod until it sits flush.
- Fill and wait: fill through the side port to about two-thirds, close the plug and give the coil 5 minutes to soak.
- Turn it on: press the fire button five times.
- Set the power: start at the suggested wattage and adjust from there.
Who the DRAG H40 Pro Is For
The Voopoo DRAG H40 Pro suits vapers who want a compact pod mod with a 2450mAh battery and PnP X coils from 0.3Ω to 1.0Ω. For up to 60W on the same pods and coils, see the DRAG S3.
Good to know: The 0.72-inch screen is small, and its text can be hard to read.
What’s in the DRAG H40 Pro Box
- Voopoo DRAG H40 Pro device (2450mAh, built in)
- PnP X cartridge, 5ml (MTL or DTL version)
- Two PnP X coils: 0.6Ω and 0.8Ω with the MTL pod, or 0.3Ω and 0.45Ω with the DTL pod
- USB-C cable
- User manual
Voopoo DRAG H40 Pro FAQ
Which coils fit the DRAG H40 Pro?
PnP X coils from 0.3Ω to 1.0Ω. It tops out at 40W, and the 0.15Ω and 0.2Ω are below its 0.3Ω minimum. We sell PnP X coils.
Which pods fit it?
PnP X cartridges, which hold 5ml and come in MTL and DTL versions. We sell PnP X pods.
How is it different from the original DRAG H40?
The original DRAG H40 has a 1500mAh battery and uses PnP Pod II pods with PnP coils. The H40 Pro has a 2450mAh battery and uses PnP X pods and coils, so the two don’t share pods or coils.
How does it charge?
Over USB-C at 5V/2A. The cable comes in the box.
Which coils come in the box?
Two PnP X coils: 0.6Ω and 0.8Ω with the MTL pod, or 0.3Ω and 0.45Ω with the DTL pod.
- Reviews
- Questions
USExcited
I love it and it's a great fit. Very light weight and easy to work.
Compatible With...
Replacement Pods & Cartridges
Resistance 0.15–1.0Ω
You May Also Like
4 colors
3000mAh battery · 7 colors
2000mAh battery · 9 colors
800mAh battery · 2 colors
