OXVA VPRIME 2 Pod Kit

The OXVA VPRIME 2 Pod Kit runs 5W to 60W from a built-in 3400mAh battery and takes 6ml VPRIME Dual Mesh pods. It fires on the draw or with the button. BOOST mode fires both meshes in the pod, and ECO fires one. OXVA rates its side airflow slider from RDL to DTL. See more from OXVA or compare other pod systems.

VPRIME 2 Highlights

VPRIME 2 Specs

VPRIME 2 Pods and Wattage

The VPRIME 2 Pod Kit takes VPRIME Dual Mesh pods, and OXVA says the original VPRIME pods fit too. OXVA gives no wattage for the Dual Mesh pods. These are the ranges major retailers list:

We sell VPRIME Dual Mesh pods in both resistances, 2 per pack.

How to Set Up the VPRIME 2

1. Charge it: plug in the USB-C cable from the box.
2. Fill the pod: lift the silicone plug on the side of the pod, fill and press it closed.
3. Let it soak: wait a few minutes after filling a new pod.
4. Turn it on: click the fire button five times.
5. Set the power: click four times to switch between ECO and BOOST, or three times to change the wattage. Start at the low end of the pod’s range.

Who the VPRIME 2 Is For

The OXVA VPRIME 2 Pod Kit suits RDL and DTL vapers who want 60W and a 3400mAh battery in a pod kit. It holds 6ml and fires on the draw or the button. For a smaller OXVA kit that fires on the draw only and runs to 40W, see the NeXLIM 2. For MTL, the XLIM Pro 3 takes XLIM pods that OXVA rates for MTL.

Good to know: at 150g it’s big and heavy for a pod kit, and the side switch locks only the fire button, so a draw still fires it.

What’s in the VPRIME 2 Box

• OXVA VPRIME 2 device
• VPRIME Dual Mesh pod, 0.4Ω, 6ml (fitted)
• VPRIME Dual Mesh pod, 0.6Ω, 6ml
• USB-C cable
• User manual
• Use suggestion card