Dotmod DotPod Plus Pod System
- Alabama
- Alaska
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- Florida
- Georgia
- Hawaii
- Idaho
- IllinoisNot to Chicago or Cook County
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South CarolinaUntil Feb 1, 2027 (enforcement date)
- South Dakota
- Tennessee
- TexasSome restrictions may apply
- Utah
- Vermont
- Virginia
- Washington
- West Virginia
- Wisconsin
- Wyoming
- Washington, DC
- Military (APO, FPO, DPO)
Original price was: $35.99.$30.99Current price is: $30.99.
The dotmod dotPod Plus is a 35W pod system with a 1500mAh built-in battery, a 0.96-inch screen, auto power and 3ml pods in 0.4Ω, 0.6Ω, 0.8Ω and 1.0Ω.
Dotmod DotPod Plus Pod System Review
The dotmod dotPod Plus Pod System is a 35W pod system with a 1500mAh built-in battery, a 0.96-inch screen and 3ml dotPod Plus pods with built-in mesh coils. Auto mode sets the power for each pod, and the airflow is adjustable. See more from dotmod or compare other pod systems.
dotPod Plus Highlights
Up to 35W
dotmod’s manual gives 5W to 35W. In auto, it sets 28W for a 0.4Ω pod, 22W for 0.6Ω, 18W for 0.8Ω and 14W for 1.0Ω.
3ml Pods
The pods come in 0.4Ω, 0.6Ω, 0.8Ω and 1.0Ω. Magnets hold the pod in, and it fills from the side under a silicone cover.
0.96-Inch Screen
dotmod gives the screen two interface options. Our photos show it with the wattage, the pod’s resistance and the battery level.
5V/2A Charging
It charges over USB-C at 5V/2A.
dotPod Plus Specs
Device
- Battery: 1500mAh, built in
- Output: 5–35W
- Pod resistance: 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω
- Power: auto, by pod resistance
- Screen: 0.96-inch, two interface options
- Controls: power setting buttons on the side
- Airflow: adjustable
- Charging: USB-C, 5V/2A
- Safety: 10-second cut-off; short-circuit, open-circuit, resistance, overheat and battery protection; it vibrates to flag alerts
Pod
- Capacity: 3ml
- Coil: built-in mesh coil
- Fill: side fill under a silicone cover
- Fit: magnetic
dotPod Plus Colors
- Options: Dark Grey, Gold Grey, Green, Pearl White, Purple
dotPod Plus Power by Pod
In auto, the dotPod Plus sets the power from the pod’s resistance. dotmod’s manual gives the auto setting and the range for each pod:
| Pod | Auto setting | Range |
|---|---|---|
| 0.4Ω (0.28–0.52Ω) | 28W | 5–35W |
| 0.6Ω (0.52–0.72Ω) | 22W | 5–24W |
| 0.8Ω (0.72–0.92Ω) | 18W | 5–20W |
| 1.0Ω (0.92–1.28Ω) | 14W | 5–16W |
dotmod prints these ratings on the pod boxes: 28W to 35W for the 0.4Ω, 22W to 24W for the 0.6Ω, 16W to 20W for the 0.8Ω and 14W to 16W for the 1.0Ω.
How to Set Up the dotPod Plus
- Fill the pod: pull the pod out (magnets hold it), open the silicone cover over the fill hole on the side and fill it. Don’t overfill.
- Fit the pod: push it back into the device.
- Turn it on: press the power button 5 times.
- Set the power: auto sets it for the pod; use the power setting buttons to change it.
- Set the airflow: adjust the airflow control on the side.
Who the dotPod Plus Is For
The dotmod dotPod Plus suits vapers who want a 35W pod system with a screen, auto power and four pod resistances, from a tight MTL draw to a more open one. For a 60W pod system that also takes a dotCoil tank, see the dotMod dotPod Max.
Good to know: dotPod Plus pods have the coil built in, so you replace the whole pod when it wears out.
What’s in the dotPod Plus Kit
- dotmod dotPod Plus device
- 2 dotPod Plus Replacement Pods
- USB-C charging cable
- User manual
dotmod dotPod Plus FAQ
How big is the battery?
1500mAh, built in. It charges over USB-C at 5V/2A.
Which pods does it take?
dotPod Plus Replacement Pods: 3ml, in 0.4Ω, 0.6Ω, 0.8Ω and 1.0Ω, 2 to a pack.
How does auto mode work?
It reads the pod’s resistance and sets the power: 28W for the 0.4Ω, 22W for the 0.6Ω, 18W for the 0.8Ω and 14W for the 1.0Ω.
How do I turn it on or lock it?
Press the power button 5 times to turn it on or off. Press it 4 times to lock or unlock it.
What does the screen show?
dotmod gives the 0.96-inch screen two interface options. Our photos show the wattage, the pod’s resistance and the battery level.
Compatible With...
Replacement Pods & Cartridges
You May Also Like
Vape Pod Systems & Kits
Vape Pod Systems & Kits
Vape Pod Systems & Kits
Vape Pod Systems & Kits
