Uwell VALYRIAN IV Tank

The Uwell Valyrian IV Tank is an 8.5ml sub-ohm tank, the largest in Uwell’s Valyrian family. It runs Uwell’s V-Coils: the 0.18Ω for dense direct-to-lung (DTL) clouds at 90–100W and the 0.35Ω for flavor at 55–65W. A press-to-open top cap makes refills one-handed, and a silicone sleeve protects the glass. See more from Uwell or compare other sub-ohm tanks.

Valyrian IV Tank Highlights

Valyrian IV Tank Specs

V-Coil Ratings

Uwell recommends these wattages for the coils that come with the Valyrian IV Tank:

We sell Uwell V-Coils in packs of 2. The Valyrian IV Tank also takes our Valyrian 3 coils.

How to Set Up the Valyrian IV Tank

1. Prime the coil: drip a few drops of e-liquid onto the cotton in the coil’s wick holes.
2. Fill it: press the top cap to open it, fill the tank, then close the cap.
3. Let it soak: wait about 5 minutes so the cotton soaks through.
4. Set the power: start at the low end of your coil’s range, 90W for the 0.18Ω or 55W for the 0.35Ω.
5. Tune the airflow: turn the airflow ring at the base to open or tighten the draw.

Who the Valyrian IV Tank Is For

The Uwell Valyrian IV Tank suits DTL vapers who want a big 8.5ml tank and the choice of a cloud coil or a flavor coil. Pair it with a 510 mod that reaches 100W for the 0.18Ω coil. For a smaller 6ml Valyrian, see the Uwell Valyrian 3 Tank.

Good to know: Uwell says the Valyrian IV’s self-cleaning design redirects condensation, which cuts down on leaks and on how often you need to clean the tank.

What’s in the Valyrian IV Tank Box

• Valyrian IV Tank, 8.5ml
• V-Coil 0.18Ω (fitted)
• V-Coil 0.35Ω
• Silicone protector
• Spare bubble glass
• Spare O-rings
• User manual