SMOK IPX80 80W Pod Mod Kit Review
The SMOK IPX80 80W Pod Mod Kit is an IP67-rated pod mod with a 3000mAh battery, a 0.96-inch screen and a 5.5ml pod for RPM 2 coils. It comes with the RPM 2 0.16Ω mesh and 0.6Ω DC MTL coils. See more from SMOK or compare other pod systems.
IPX80 Highlights
IP67 Rated
SMOK built the IPX80 to shrug off water splashes, dust and drops.
3000mAh, 80W
A built-in 3000mAh battery runs the IPX80 from 1W to 80W and charges over USB-C.
Air-Inlet Ring
Turn the ring left for more airflow or right for less.
Two Pod Options
The kit’s 5.5ml pod takes RPM 2 coils. An IPX80 pod for RPM coils is sold separately.
IPX80 Specs
IPX80 Device
- Battery: 3000mAh, built in
- Output: 1–80W
- Voltage: 0.5–4.0V
- Resistance range: 0.15–3Ω
- Screen: 0.96-inch
- Protection: IP67
- Firing: fire button, 0.001s
- Airflow: adjustable air-inlet ring
- Charging: USB-C, up to 1.4A
- Size: 107 × 34.8 × 34.5mm
- Weight: 130g
Pod
- Capacity: 5.5ml
- Fill: fill slot under a rubber plug
- Coils: RPM 2 series (RPM pod sold separately)
- Mouthpiece: duck-billed
Colors
- Options: Black Carbon Fiber, Blue, Brown, Fluid 7 Color, Fluid Black Grey, Grey, Red
IPX80 Coils and Wattage
The IPX80 kit pod takes RPM 2 coils. SMOK rates the ones in the box like this:
| Coil | Rating |
|---|---|
| RPM 2 Mesh 0.16Ω (in the box) | DL, 25–50W, best at 40W |
| RPM 2 DC 0.6Ω MTL (in the box) | MTL, 12–25W |
We sell RPM 2 coils and IPX80 pods in RPM 2 and RPM versions.
How to Set Up the IPX80
- Charge it: plug in the USB-C cable from the box.
- Fit a coil: push the 0.16Ω mesh or the 0.6Ω DC MTL coil into the pod.
- Fill the pod: take the pod out, pull the rubber plug, fill it and press the plug back in.
- Wait: give the coil 5 minutes to soak, then put the pod back.
- Set the power: use the up and down buttons to set a wattage within your coil’s rating, and turn the air-inlet ring to set the draw.
Who the IPX80 Is For
The SMOK IPX80 suits vapers who want a tough, big-battery pod mod for direct-lung or MTL vaping on RPM 2 coils. For something slimmer and lighter, see the RPM C.
Good to know: IP67 means the IPX80 is built to survive splashes, dust and drops. It isn’t made for use under water.
What’s in the IPX80 Box
- SMOK IPX80 device (3000mAh)
- IPX80 RPM 2 pod, 5.5ml
- RPM 2 Mesh 0.16Ω coil
- RPM 2 DC 0.6Ω MTL coil
- USB-C cable
- User manual











