Puffco New Proxy Pipe Kit Review
The Puffco New Proxy Pipe Kit is the updated Proxy e-rig for concentrates: the new app-connected Proxy base with a hand-blown glass pipe. It has a taller 3D Chamber, four heat settings from 490°F to 545°F and up to 15 uses per charge, by Puffco’s rating. See more from Puffco or browse all dry herb and concentrate vaporizers.
New Proxy Pipe Kit Highlights
Puffco Connect App
Pair it by Bluetooth to set the temperature, vapor level, session time and mood lighting.
Taller 3D Chamber
Puffco made the chamber taller to reduce splash-out. It heats from the sides rather than the bottom.
Glass Pipe
The Sherlock-style pipe is hand-blown borosilicate glass, and the base fits every Proxy glass piece, old and new.
Use It While It Charges
It charges by USB-C in about 2 hours, and you can use it while it’s plugged in, as long as it has some charge.
New Proxy Pipe Kit Specs
Device
- Heat settings: 4, from 490°F to 545°F
- Controls: one button
- App: Puffco Connect, by Bluetooth
- Lights: customizable, dim with four presses
Battery and Charging
- Battery: built in, up to 15 uses per charge (Puffco)
- Charging: USB-C, about 2 hours
- Use while charging: yes, if it has some charge
- Wireless charging: no
Chamber and Glass
- Chamber: New Proxy 3D Chamber, taller
- Cap: Joystick Cap
- Glass: hand-blown borosilicate pipe
New Proxy Pipe Kit Heat Settings
Click the button to move through the four presets:
| Light | Temperature |
|---|---|
| Blue | 490°F |
| Green | 510°F |
| Red | 530°F |
| White | 545°F |
Puffco’s manual says White gives the most vapor and strength, with less flavor. You can change the presets in the app.
How to Set Up the New Proxy Pipe Kit
- Charge it: charge it fully by USB-C before first use.
- Turn it on: press and hold the button for 3 seconds.
- Load it: take off the Joystick Cap, use the loading tool to put a small amount of concentrate in the chamber, and put the cap back on.
- Heat it: click to choose a setting and double-click to start. When it flashes and vibrates twice, draw gently.
- Pair the app: hold the button for 6 seconds until the light pulses blue, then connect it in Puffco Connect.
Who the New Proxy Pipe Kit Is For
The Puffco New Proxy Pipe Kit suits anyone who wants the classic Proxy pipe with app control. For a pocket setup with no glass, add the Proxy Core Accessory to this base, or see the Proxy Core Kit.
Good to know: Take the base out before you clean the glass. Puffco says to soak the glass in isopropyl alcohol for 30 minutes, rinse it with water and let it dry fully.
What’s in the New Proxy Pipe Kit Box
- Proxy base with the New Proxy 3D Chamber
- Proxy Pipe (glass)
- Joystick Cap
- Loading tool
- Cotton swabs
- USB-C cable









